I. Working Principle
Wireless communication technology is used for signal transmission. First, the sensor on the lamp collects analog signals of people or vehicles entering the detection area. Through wireless transmission to the control system, the controller will analyze and process the information, and then uniformly issue commands to each lamp. Each lamp will execute the corresponding turn-on or turn-off commands.
II. System Composition
Intelligent control module is the control center of the whole lighting system. It identifies and processes the detection signal feedback from the LED lamp. It controls the lamp to carry out lighting control modes such as full power lighting, half power lighting and linkage lighting, and executes the preset dimming function.
Intelligent LED lamp is the main part of garage lighting. It consists of integrated communication module, human body sensor and LED light source. It uses wireless communication. The lamps are connected to the voltage of conventional AC220V, and each lighting control circuit is connected to the AC220V of municipal electric power by a separate phase line (L) and a zero line (N).
Intelligent remote controller is used to debug the whole garage lighting system. It is used to set the type of lamps (lane lamp, parking lamp and constant light lamp), read and write the address of lamps, control the full-bright and full-out of lamps, control the lighting power of lamps, single lamp dimming, control circuit dimming, lighting scheme and other functions.
III. Product Function
(1) Intelligent adjustment and control: when the unmanned vehicle moves, it automatically keeps the illumination mode of light. When people come and go, the lane lamps in this area will automatically switch to full-light illumination mode. The parking lights will not be on. When the vehicle enters the corresponding parking space, the lights in this parking space will automatically light up.
(2) Multiple control modes: both on-site intelligent remote controller control and area lighting control module control can be used;
(3) Various scenario modes: according to the needs of customers, various scenario lighting modes can be set, such as half-power lighting, full-power lighting, low-power lighting, forced opening and resetting, etc.
(4) Fault feedback function: When a lamp fails, the fault indicator on the area lighting control module flashes continuously, reminding the management personnel to deal with it.
(5) Free Setting Function: Users can set the lighting power of lamps freely according to the power consumption on site.
IV. Equipment Specification and Parameters
Intelligent Lighting Control Module
1. Realize the function of "light-up, full-light, half-power light-up" and automatic dimming.
2. The dimming function of the control circuit enables the lighting power of the whole lighting circuit lamps to be set freely.
3. Forced lighting function, when an emergency occurs, it can be forced to start lighting.
4. Input Voltage: AC380V
5. Uplink communication interface: support GPRS/RJ45/RS485/RS232/CAN and other communication modes, default RJ45 network port
6. Downlink communication: wireless
7. Environmental Temperature: - 15 ~40 65507
8. Environmental humidity: 10%~90%(without condensation)
Intelligent Remote Controller
Set up the type of lamp (lane lamp, parking lamp), read and write the address of the lamp, control the lamp to turn on and off completely, control the lamp to turn on half power, control the circuit to dim light, etc.
Warranty period: 2 years, the problem caused by force majeure will not be maintained